One walk-away cycle reaches every corner of the incubator — no scrubbing, no disassembly, no guesswork.
Reaches every surface — vents, sensors, corners and biofilm that wipe-downs miss
Effective against fungal spores — where IPA and ethanol fall short
Walk-away simplicity — pour, place, press start, no manual scrubbing or disassembly
Protects your work — routine decontamination helps prevent contamination events that can cost months of experiments
Built-in confidence — validated ≥6-log kill efficacy, documented with every cycle
≥6-logvalidated kill efficacy
180 minwalk-away cycle, zero supervision
No residueH₂O₂ fully decomposes to water and oxygen
How It Works
Pour. Place. Press start. Walk away.
Four steps, zero supervision. MycoFog® handles the rest in 3 hours.
1
Prepare
Remove cultures and labware. Set incubator to 45°C. Disable CO₂ and humidity controls. Place Biological Indicators at key locations.
2
Pour & Place
Pour the pre-measured reagent bottle into the fogger reservoir. Place the fogger at mid-level inside the incubator for even fog distribution.
3
Press Start
Hold the button 2 seconds. A 12-second safety countdown begins before fogging starts. Close the door — fully automatic from here.
4
Verify & Return
After 180 min the H₂O₂ has fully decomposed. Incubate BIs for 24–48 hrs to confirm ≥6-log kill. Return incubator to service.
Why MycoFog®
5 reasons 500+ labs have switched
From academic labs to GMP facilities, MycoFog® is the simplest, most affordable validated biodecontamination system available.
01
Walk-away simplicity
Pour, place, press. No training needed. No dismantling or reassembly. No supervision during the 3-hour autonomous cycle.
02
Lowest cost on market
Instrument from USD$954. From USD$995 all-in with Starter Kit.
03
Scales to any lab
MF-2D (50–500L) and MF-500D (500–1,200L) with six reagent pack sizes — covers every CO₂ incubator and workstation.
04
Proven ≥6-log efficacy
Validated with gold-standard Geobacillus stearothermophilus spore BIs on 5+ incubator brands.
05
Equipment-safe formula
Our proprietary H₂O₂ formula is non-corrosive to most metal, glass and plastic. Validated compatible with electrical and mechanical imaging systems and other hardware.
Products
Two models. Six reagent sizes. Every incubator covered.
Incubators 50–500L
MycoFog® 2D
Standard CO₂ incubators, hypoxic workstations and gloveboxes
“We tested after the first biodecontamination cycle using settle plates and found no contamination where we were observing consistent contamination previously. The system is very easy to use.”
Donald Pijak — Manager, Research Facility Operations, University of Pennsylvania
“The MycoFog® proved to be an effective means of keeping the interiors sterile and free of contaminants. The decontamination cycle takes only 180 minutes and leaves no H₂O₂ residue after the procedure.”
Dr. William Willmore — Professor of Biochemistry, Carleton University, Ottawa
“There has been no contamination observed in either incubator since first using the system 7 weeks ago. Overall, it is a good system that is easy enough to integrate into lab protocols and workflows!”
Deborah Schwarz — CEO, Advanced Cellular Dynamics, Seattle, WA
Start protecting your lab today
Try the Prove-it-to-Yourself Kit — the low-risk way to validate MycoFog® in your own incubators before committing to more.
